Intellinet 10 Port Gigabit L2+ Managed PoE++ Ethernet Switch with 2 SFP Uplink Slots - 242WPower Budget, Self-Healing, Cloud Management, 19" Rackmount –3 Yr Mfg Warranty-562003

The 10-Port L2+ Fully Managed PoE++ Switch with 8 Gigabit Ports and 2 SFP Uplinks from Intellinet Network Solutions is the feature-rich installer’s choice for small businesses and enterprises. Two 10/100/1000BASE-T 4PPoE (PoE++) ports deliver up to 90 watts to even the most power-hungry devices like Thin Clients, POS systems or PTZ speed dome cameras. Six more PoE+ Gigabit ports activate devices like IP phones and IP cameras with power up to 30 W per port. Any IEEE802.3bt/at/af-compliant device attached to the switch requires no additional power, which avoids the time and expense of electrical rewiring and reduces the clutter from power supplies and adapters on ceilings and walls. This managed switch supports any mix of PoE and non-PoE devices, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well-protected.

• PoE++/PoE+ power for 8 devices: 242 W total PoE budget. Ports 7–8 provide up to 90 W each (PoE++), ports 1–6 provide up to 30 W each (PoE+). Supports IEEE 802.3af/at/bt for access points, cameras, phones, and other powered devices.
• 10-port layout with fiber uplink options: Eight 10/100/1000 RJ45 PoE ports plus two 1G SFP slots for uplinks. Auto-MDIX and auto-negotiation on RJ45 ports to match connected equipment.
• L2+ management and traffic control: 802.1Q VLAN (tag/port-based), LACP link aggregation, IGMP snooping, port mirroring, per-port bandwidth control, storm control, and QoS via CoS/DSCP. Jumbo frames up to 9216 bytes and 20 Gbps switching fabric.
• Monitoring, security, and admin access: Web UI, Telnet, SSH, or RJ45 console configuration. SNMPv1/v2c/v3 with RMON, ACLs (MAC/IPv4/IPv6), DHCP snooping (Option 82), Dynamic ARP Inspection, DoS protections, plus RADIUS client and TACACS+ via CLI.
• PoE device recovery and electrical protection: Powered Device Monitor (PD Alive Check) can restart a PoE device that stops responding or sending traffic. Built-in short-circuit/overload/high-voltage protection, 4 kV PoE surge protection on RJ45 ports, ESD protection (8 kV air / 4 kV contact), and chassis grounding point. Includes rackmount brackets and internal power supply (100–240 VAC).